Archive for 'Events'

13.09.2017 – Free Nexus Webinars

Triggered by the unintuitive and high costs of existing design optimization software applications, iChrome set about developing Nexus as a more user friendly and affordable optimization solution.

If you want to know more about it, register today to one of our free webinar and learn how you can integrate your CAD and CAE software within Nexus to automate your design process and reach your design goals.

Nexus – New Standards for Optimization and Process Integration

The flexible and easy-to-use Graphical Interface of Nexus ...

Continue Reading →

15.06.2016 – Webinar: Design Exploration with Nexus

Register today to one of our free webinar to see how Nexus can help you to design better, faster, smarter and get a one-month fully featured demo license to experience Nexus.

Triggered by the unintuitive and high costs of the existing design optimization software applications, iChrome sets about developing Nexus as a far more user friendly and affordable optimization framework.
Nexus provides the highest standards in:

  • Process Integration and multi-disciplinary and multi-physics optimization
  • Design of Experiment ...
Continue Reading →

11.06.2016 – Nexus Workshop – Campina Grande – Brazil

logoATS

Meet Nexus at the 1st Congresso Brasileiro de Fluidodinâmica Computacional – CBCFD 2016 in Campina Grande

CbCfd

11-13 June 2016 – CBCFD 2016 – Campina Grande (Brazil)

Don’t miss the opportunity to know more about Nexus and to get your free two months full-featured ...

Continue Reading →

02.09.2015 – Webinar: Design Optimization within Nexus

Also this year iChrome offers a series of free webinars on Nexus and how designers and engineers can use iChrome optimization solution to improve their design as well as automate and combine different process to optimize their design cycles.

This year, the Nexus webinars address the following topics:

  • RESPONSE SURFACE & DATA MINING – Wednesday, May 27th
    With more than ten different Response Surface Methodologies including ...
Continue Reading →

15.04.2015 – Engineering Simulation Show

 

Also this year, iChrome will be attending the Engineering Simulation Show in Derby. Look forward to meeting some of you there.
The Engineering Simulation Show brings together FEA, design, stress, CFD and structural engineers across a wide range of disciplines and industrial sectors who share a professional interest in the use of engineering simulation software.

The show will be held at the Derby Roundhouse on April 15th. For more information:

http://www.theengineeringsimulationshow.co.uk/

Continue Reading →

26.02.2015 – Meet us at Sampe – Warwick

“Challenges for High Volume Composites Manufacturing” – Annual Seminar and SME Table-Top Exhibition

Also this year, iChrome will be attending the SAMPE UK/Ireland Seminar.
SAMPE, the Society for the Advancement of Material and Process Engineering, is globally recognised as the leading professional body for engineers and technologists associated with advanced materials and processes, in particular those based on high performance composite materials.

The conference will be held at the University of Warwick on Thursday 26th February. ...

Continue Reading →

10.06.2014 – NAFEMS UK Conference

iChrome will be attending as a presenter the NAFEMS UK Conference in Oxford on 10th June. NAFEMS is the International Association of the Engineering Modelling, Analysis and Simulation Community, a not-for-profit organisation which was established in 1983.

During the conference iChrome will provide insights on Free Mesh Morphing techniques successfully applied on CFD applications. Look forward to meeting some of you there.

For more information http://www.nafems.org/2014/uk/

Continue Reading →

23.04.2014 – Engineering Simulation Show

iChrome will be attending the Engineering Simulation Show in Derby on Wednesday 23rd April. Look forward to meeting some of you there. The Engineering Simulation Show will bring together 1000s of FEA, Design, Stress, CFD and Structural engineers across a wide range of disciplines and industrial sectors who share a professional interest in the use of engineering simulation software.

For more information http://www.theengineeringsimulationshow.co.uk/

Continue Reading →

16.04.2014 – Nexus Webinars

Design Optimization and Process Integration Solution

Computer Aided Engineering (CAE) has been utilised for many years, and there are many software applications that allow you to design and analyse products before anything physical is manufactured. Disciplines include structural, fluid dynamic, mechanical, hydraulic and thermal analysis as well as computer aided design (CAD).

Even though computers have become more powerful, and therefore simulation runs take less time, there is still a great ...

Continue Reading →

15.04.2013 – Nexus WorkShop – Brescia

Nexus WorkshopiChrome Srl, the italian branch of iChrome, is pleased to invite you to attend the Nexus WorkShop that will be held the 15th of April 2013 c/o the Mechanical and Industrial Department of University of Brescia.

At the end of the Workshop all the attendees will receive a one-month demo license of Nexus along with the possibility of arranging a Technical Meeting to be held at your premises ...

Continue Reading →
Page 1 of 2 12